OEM and private-label forged wheels are wheels engineered, machined from forged blanks, finished and packaged by a manufacturer but sold under your brand — you supply the design intent, the sizes and the logo, and the manufacturer supplies the engineering, machining, inspection, branding and export documentation, with no manufacturer branding anywhere on the product. For a wholesaler, distributor or tuning brand, this is the fastest route from “we want our own wheel line” to a container of saleable stock, without buying a forging press.
This guide walks through how the process actually runs at a manufacturer-direct supplier: the difference between white-label, private-label and full OEM, the seven stages from brief to shipment, what can carry your logo, what drives cost, and exactly what to send us so your first quotation is accurate instead of a placeholder.
The Short Answer (TL;DR)
- Three models exist. White-label (our design + your logo), private-label (our platform, restyled and rebranded for you) and full OEM (your drawing, your tooling, your design ownership).
- The process has seven stages: brief and feasibility → CAD and engineering drawing → sample → validation and documents → branding and packaging setup → series production → final QC, documents and shipment.
- MOQ is 4 pcs per design, mixed sizes allowed within an order, so you can launch a staggered fitment without committing to a full container.
- Lead times run from drawing approval: samples 10–15 working days; production 20–30 working days, with set additions for some finishes and peak periods.
- Your branding can go on the spoke face, the window, the barrel, the center cap, valve caps, the box, the label and the warranty card.
- The single biggest cause of delay is an incomplete RFQ. Size × width, PCD, ET, centre bore, quantity and destination are the six data points that turn a rough estimate into a firm price.
White-Label vs Private-Label vs Full OEM: What You Are Actually Buying
These three terms get used interchangeably in sourcing emails, and the difference matters because it decides your tooling cost, your lead time and whether a competitor can buy the same wheel next season.
| White-Label | Private-Label | Full OEM | |
|---|---|---|---|
| You supply | Logo file, sizes, finish choice | Logo, sizes, finishes, styling changes, packaging direction | Your own design or CAD, target weight, load rating, market |
| Manufacturer supplies | Existing proven design, production, QC | Base platform, restyling, engineering, tooling, production | Full engineering, tooling, production, approved drawing and QC records |
| Design exclusivity | None — branding only | Your styling and branding are exclusive; base platform is not | Yours, agreed in writing before tooling |
| Speed to first order | Fastest | Moderate | Slowest — design and validation add time |
| Best for | Distributors testing a new brand line | Tuning brands building a recognisable range | Established brands protecting a signature design |
Most buyers who contact us start at white-label or private-label on their first program, then move to full OEM once a style sells. Because forged wheels are a machining-led product rather than a mould-led one, moving between the three is far less painful than it is in cast wheel production — you are not writing off a casting die every time you change a spoke profile.
The Seven Stages, Start to Container
1. Brief and feasibility review
You send target vehicles or applications, sizes, construction preference, finish direction, target volume and destination market. We confirm what is producible as drawn, flag anything that will fight the caliper or the fender, and tell you honestly if a spoke profile needs thickening for the load you are asking for. Nothing is quoted before this step, because a price on an unbuildable drawing helps nobody.
2. CAD and engineering drawing approval
We turn the brief into a dimensioned drawing: face design, spoke section, PCD, ET, centre bore, lip and barrel profile, valve position, cap seat. This is the document your lead time is counted from — not the date of your first email, and not the date of the PO. Revisions before approval cost nothing but time; revisions after approval restart the clock.
3. Sample production
One wheel, or a staggered pair, produced on the same equipment as series production so what you approve is what you receive. Samples run 10–15 working days. Most buyers use the sample for fitment checks on the actual vehicle, photography for their catalogue and a finish sign-off under their own lighting.
4. Validation and road-approval documents
Our group’s plant is certified to ISO / IATF 16949, with copies on request. There is no JWL, VIA or TÜV product certification: every wheel is custom-engineered for one vehicle, so buyers who need road approval arrange it in their own market, and we supply the approved drawing (size, ET, CB, load rating) and the wheel’s QC record on request. Decide what your market needs at the drawing stage, not after production — the destination market determines what evidence your customs broker and your insurer will want.
5. Branding and packaging setup
Logo placement is marked on the approved drawing, custom center caps are tooled, and packaging artwork is proofed. See the branding table below for what is available.
6. Series production
Every forged blank is inspected before cutting, then machined on 60+ CNC machines (3- to 5-axis) at our group’s plant, followed by finishing. Production runs 20–30 working days from drawing approval, plus 5 for brushed, polished or two-tone finishes, 15 for PVD chrome, and 5 in peak periods or for complex designs. Monoblock, 2-piece and 3-piece constructions are all available; multi-piece builds involve more parts and assembly, so the exact window is confirmed on your quote.
7. Final QC, documents and shipment
Dimensional and finish inspection, packing, and export paperwork under HS code 8708.70. We ship DDP, EXW, FOB or CIF — most customers choose DDP — and we regularly ship into the EU, North America, Australia and South Africa.
| Stage | Duration | Note |
|---|---|---|
| Sample | 10–15 working days | Same equipment as series production |
| Series production | 20–30 working days | Powder-coated finish, standard schedule |
| Brushed, polished or two-tone finish | +5 working days | Extra finishing steps |
| PVD chrome | +15 working days | Round trip to a specialist plating plant |
| Peak season or complex design | +5 working days | Confirmed on your quote |
| Freight | Add per destination | Quoted with your Incoterm |
A realistic planning figure for a first private-label program, including one round of drawing revisions and a sample approval cycle, is roughly 8–12 weeks from first brief to goods ready. Repeat orders on an approved drawing skip stages 1 to 5 entirely.
Where Your Branding Can Physically Go
| Location | Method | What to send us |
|---|---|---|
| Spoke face or window | Laser etching or CNC engraving | Vector logo (AI, EPS or SVG) |
| Barrel / inner rim | Laser marking | Vector logo + required legal markings |
| Center cap | Custom cap face, tooled to your artwork | Vector logo + colour references |
| Valve caps, lug accessories | Branded accessory kit | Logo + quantity per set |
| Box, label, warranty card | Printed to your artwork | Print-ready files + barcode / SKU scheme |
The deep lip and barrel shown above are typical marking surfaces: on a deep dish forged wheel there is enough uninterrupted material to carry a full brand wordmark rather than a compressed logo. Wheels ship with no FLEXIFORGED branding on them unless you specifically ask for it. If you want a neutral shipment — unbranded boxes, no manufacturer marks, your labels applied in your own warehouse — say so in the RFQ and we will build it that way.
What Actually Drives Your Unit Price
- Construction. Monoblock is the efficient choice for most programs; 2-piece and 3-piece buy you lip depth, staggered offsets and rebuildability at a higher price and longer lead time.
- Diameter and width. Blank size scales with the wheel, and so does machining time.
- Material. Forged 6061-T6 aluminium for the great majority of road programs; forged AZ80 magnesium where weight is the priority and the buyer accepts the cost and care requirements.
- Finish. Brushed, polished, multi-stage and two-tone finishes each add labour per wheel.
- Branding tooling. Custom center caps and custom packaging carry their own one-time setup, amortised over your run.
- Quantity per design. MOQ is 4 pcs, but setup cost per wheel falls sharply as the run grows — this is where the real margin conversation happens.
- Incoterm. DDP, EXW, FOB and CIF prices are not comparable line for line; make sure you benchmark suppliers on the same term.
If you are still deciding between construction types before you brief a program, the custom forged wheels hub lays out the options side by side.
What to Send Us So Your First Quote Is Firm
- Size × width for each position (e.g. 20×9 front, 20×10.5 rear)
- PCD / bolt pattern (e.g. 5×112)
- ET / offset per position
- Centre bore — machined to your hub, so no spigot rings are needed
- Construction: monoblock, 2-piece, 3-piece, or “advise us”
- Finish: reference photos beat colour names every time
- Quantity per design, and your expected 12-month volume
- Destination and preferred Incoterm
- Branding: vector logo, and which locations from the table above
- Market: EU, North America, Australia, South Africa or elsewhere — this drives road-approval paperwork and marking requirements
Why Buyers Run Private-Label Programs With FLEXIFORGED
FLEXIFORGED has operated from Chongqing, China since 2017, manufacturer-direct with no trading layer. Wheels are machined on 60+ CNC machines (3- to 5-axis) at our group’s plant, and design, assembly, a second inspection and packing stay in-house — which is why we can answer engineering changes directly instead of relaying them through a middleman and adding a week to every answer.
For a private-label buyer, that shows up in three practical ways: engineering feedback on your drawing within the quoting cycle rather than after it; a 4-piece MOQ with mixed sizes, so you can validate a design in your market before committing capital; and one point of contact who can speak to material, machining, finishing, marking and export documentation in the same email. We work in forged 6061-T6 aluminium and forged AZ80 magnesium; our group’s plant is certified to ISO / IATF 16949, and you can verify us with a plant visit by appointment or a live video inspection.
FAQ
Can you put our logo on the wheels?
Yes. Your logo can be laser-etched or CNC-engraved on the spoke face, the wheel window or the barrel, and it can be produced on custom center caps, valve caps, boxes, labels and warranty cards. Wheels ship with no FLEXIFORGED branding on them unless you ask for it. Send a vector file (AI, EPS or SVG) and we will mark the placement on the drawing before sampling.
What’s your MOQ for a private-label program?
Our MOQ is 4 pcs per design, and you can mix sizes within an order — for example two 20×9 and two 20×10.5 for a staggered set. Custom center cap tooling and custom printed packaging have their own setup, so tell us your expected 12-month volume and we will quote the branding items separately from the wheels.
How long does the whole process take from drawing to shipment?
Samples take 10–15 working days, and series production takes 20–30 working days from drawing approval, plus 5 for brushed, polished or two-tone finishes, 15 for PVD chrome, and 5 in peak periods or for complex designs. Add freight to your destination. A first private-label program including one revision round and a sample approval cycle usually runs about 8–12 weeks from brief to goods ready.
Who owns the design if you develop it for us?
If you supply the design, or pay for exclusive development, the design is yours and we do not sell it to another buyer. If you add your branding to one of our existing platforms, the base design stays ours and only your branding is exclusive to you. Whichever arrangement applies is put in writing before tooling starts.
Do you provide test reports for our market?
Our group’s plant is certified to ISO / IATF 16949, with copies on request. There is no JWL, VIA or TÜV product certification: every wheel is custom-engineered for one vehicle, so buyers who need road approval arrange it in their own market, and we supply the approved drawing (size, ET, CB, load rating) and the wheel’s QC record on request. Tell us the destination market at the briefing stage.
Are you a manufacturer or a trading company?
Manufacturer-direct, with no trading layer. FLEXIFORGED has operated from Chongqing, China since 2017: forged blanks are inspected before cutting, wheels are machined on 60+ CNC machines at our group’s plant, and design, assembly, a second inspection and packing stay in-house. You are welcome to book a live video inspection or a plant visit by appointment before placing a production order.
Start Your Private-Label Program
Send the ten data points above and we will come back with a firm quotation, a realistic schedule and any engineering flags on your drawing — not a placeholder price.
Minimum to quote: Size × Width / PCD / ET / Quantity / Destination / Email
Use our quote form or email jackie.wei@flexiforged.com — or read more about how we work.